Villeroy & Boch
Sale
Search
ProfessionalsShowrooms & Dealers
A Subway 3.0 bath tap on a bath with a hand shower in front of a green tiled wall

How to replace silicone sealant

Reading Time: 10 minutes | Article from 18.4.2024
Share

Sooner or later, whether in the bathroom or kitchen, silicone sealant will start to show signs of wear and tear and will need to be replaced. We explain how to repair silicone sealant and the important points to bear in mind for silicone grouting.

Content

  • When and why should you remove silicone sealant?
  • How to repair silicone sealant
  • Choosing the right silicone
  • How to replace bathroom sealant

At a glance

  • Silicone seals protect the building structure from moisture and dirt while absorbing stress.

  • It’s important to replace silicone sealant which has yellowed, cracked and become mould-infested

  • Properly preparing and cleaning the seals is crucial to ensure the new silicone holds and seals properly.

  • Suitable silicone is available for every area

When and why should you remove silicone sealant?

After a while, silicone seals start to look unsightly and cracked. You will then need to take DIY action quickly. This is because damaged sealant can lead to water damage and mould formation. We explain how you can repair silicone sealant or how to remove and replace old silicone. In many cases, it can actually be better to replace bathroom sealant.

How does silicone sealant function in the home?

Silicone is flexible and water-repellent, making it an ideal sealant for joints in bathrooms and kitchens, at all floor-wall transitions and around windows. Silicone seals are applied in areas requiring expansion joints – specifically, where tiles meet other materials or walls.
These seals perform several functions: They absorb stress and safeguard the building structure from dirt and moisture.

How does silicone sealant function in the home?

Not all silicone is the same. For the kitchen,where food is prepared and stored, it is recommended to use non-toxic kitchen silicone.
Sanitary silicone is ideal to withstand the high humidity often present in bathrooms. It has good drying properties and also contains fungicidal ingredients that inhibit mould growth.
However, silicone seals around your shower tray, bath or ceramic sink will not last forever. The fungicidal effect of the sealant will also wear off after a few years. This will then allow mould to form on the silicone joints.

A black and white tiled shower with the Wallway shower system by Villeroy & Boch.

Signs that you need to replace silicone sealant

Fine cracks can sometimes appear in silicone joints due to bathroom fixtures becoming loose or if they have been installed incorrectly. Dirt and moisture also affect seals and can cause discolouration and cracking.

You can carry out a DIY repair on small cracks and holes in joints using special repair products. However, for larger cracks, a simple repair is not enough. In this case, you should remove old silicone sealant and replace it. As well as looking unsightly, these cracks also pose a risk: Moisture can penetrate into the building fabric through the gaps, causing damage and encouraging mould formation on the walls.

Modern bathroom with a Universo TwistFlush toilet, wooden washstand with orange Artis washbasin and patterned floor tiles.

The problem of mould growth and its removal

Mould is not uncommon in rooms such as bathrooms where humidity levels are often very high. The problem is that mould forms hyphae as it grows. These are initially colourless and therefore invisible. It is only when mould forms spores that signs appear in the form of yellow or black mould stains.

While mould in low concentrations does not pose a health risk, it can cause respiratory irritation in allergy-prone individuals and those with weakened immune systems. Wiping off mould stains will not solve the problem, because it usually forms within the joints or below the silicone.
New mould stains would quickly reappear on the joints. The best solution is therefore to replace silicone sealant where affected.

How to repair silicone sealant

Small cracks can sometimes form within the joints due to significant movements of bathroom fittings, dirt and moisture. In this case, repairing the silicone joints is usually enough. You can buy repair silicone for this. It adheres very well and can be easily applied over the existing silicone.

However, if the cracks are too large or if mould stains have already formed on the silicone joints, the best plan is to replace the tile grouting. In this case, it is not a good idea to apply new silicone on top of the old sealant. The old, dry material would not bond with the new silicone and this would then allow moisture to enter the gaps and encourage mould growth.

The following therefore applies in particular for the bathroom: If you are replacing silicone in the bathroom, remove old silicone sealant carefully and clean the surface thoroughly. You will need a grout rake, water, washing-up liquid and a small bucket for this. In addition, you will need a silicone gun for cartridges, a silicone cartridge and a plastic blade to scrape the joints.

Finion Midnight Blue Matt vanity unit and wall cabinet in a modern bathroom with light-blue accents by Villeroy & Boch.
A white floor-standing toilet with cistern in a minimalist bathroom with beige and blue walls.
A wall-mounted mirror cabinet and a Sentique washbasin in a bathroom by Villeroy & Boch.
  1. Removing old silicone sealant and cleaning the surface

    Before you replace silicone sealant, it is important to first carefully scrape the old silicone out of the joint using a grout scraper to avoid any damage to the floor or wall. Then clean the joints thoroughly, as this creates a stable surface for the new silicone.

    DIY tips: Start by removing coarse dirt, for example, using a special silicone remover. Then clean the joints again with water and washing-up liquid. If mould has already formed on the joints, it’s best to use a mould cleaning agent for removing mould from silicone. After cleaning, leave the tiles and joints to dry completely before applying new silicone. Important: Wear breathing protection and gloves when carrying out this work and make sure the room is well ventilated!

  2. Taping silicone joints for repairs

    It will be easier to replace joints in the bathroom or kitchen if you cover the edges with masking tape, creating a clear border. Apply the masking tape on both sides. This will avoid having to remove excess sealant from the tiles and your bathroom fixtures later.

  3. Pouring and smoothing the silicone compound

    Timing is crucial in this step, as silicone dries within a few minutes. Therefore, all tools should be readily available. Do you need to replace silicone sealant at floor-wall transitions? If so, follow these steps:

    First, apply primer or bonding agent to the gap and insert a backer rod. This will help improve elasticity.

    Then cut the nozzle of the cartridge tip at an angle. The opening should be two millimetres wider than the joint.

    Then position the tip and gently squeeze the silicone compound into the joints, ideally at a 45-degree angle. You should only wet the edges of the joint.

    Guide the spray gun with the cartridge along the joint, if possible without putting it down, in order to distribute the silicone compound evenly.

    Immediately after application, smooth down the sealant using a finishing trowel previously moistened with smoothing agent or washing-up liquid to remove any residue.

  4. Allowing sealant to dry

    Leave the repaired silicone joints to dry before exposing them to any stresses or making corrections. The sealant must not come into contact with water, so if you are replacing silicone in the shower, for example, make sure that it is not used for the next 24 hours. The same applies for the washbasin or bath.

Choosing the right silicone

Different rules apply if you are replacing silicone in the bathroom or carrying out repairs in another area of your home. Specific types of silicone are required for different areas. Silicone should generally have high tensile strength. Other material properties are important too, depending on where you are applying it.

A Subway Style 45 cm kitchen sink with Steel Expert 2.0 tap on a small kitchen island.
xyz

How to replace bathroom sealant

Silicone joints can be found in different areas of the home. Their function is to protect the building fabric from dirt and moisture while absorbing stress. To ensure they can fulfil these tasks reliably, occasional DIY repairs will be required. Different processes apply depending on whether you are repairing sealant in the bathroom or in the kitchen.

Our useful DIY tips will help you repair or replace silicone sealant in any room of your home. And if you are looking for high-quality sanitary ceramics or modern kitchen fittings, Villeroy & Boch has a wide range of products for you to choose from.

Top product categories

  • Gourmet plates
  • Table cutlery
  • Decanter
  • Wall-mounted washbasins
  • Rimless toilets

Get to know our Professional Portal for specialised partners

To the Professional Portal

Follow us on social Media

Change your settings


© Villeroy & Boch Group 2024

  • Privacy Policy
  • Cookie Policy
  • GTC of use
  • Legal Notice
  • Customer Feedback
  • Tax Strategy